Siemens KDN Series Instrucciones de operaciones descargar pdf (Pagina 243)

KINCO

243

When connecting multiple instruments, for distinguishing instruments, each instrument must

be set C84 value with a different parameter. .

3、Must press “FUNC+PARA” to set the parameter；

4、PROG. have 19 numbers and SEG have 30 numbers, press DOWN key (sub) and PROG key

(add) to change program number；

5、Press “FUNC+PROG” to change the program.----every program must be set firstly and then

communicate will be ok, or else “PLC Response Error” will print;

6、After “RUN/HLD” light on, many parameters can’t be modified(e.g. SET) In order to reset, press

“ PROG+RUN/HOLD” .

Modify the parameter at the state of “DISP”, not at the state of “INPUT”；

7、On the temperature controller, time parameters show number with sexagesimal.

（ Example it shows 2222 on the screen, but on the controller panel shows

37.02-----37.00*60+2=2222）

8、PROG’s address setting：

FBR1_R indicates prog 1. (e.g. PROG 1) format: DDD.DD. Main address DDD indicates seg

No, subaddress DD indicates parameter value, the correspondence as follows

（Example：FBR1_R address 11.10 indicates PROG 1,SEG 1,T1 2nd ）

Sub addr DD correspond to temperature controller：

Sub Addr Parameter Sub Addr Parameter

.0 SP .12 T2 2nd

.1 TM .13 T3 1st

.2 None（Skip） .14 T3 2nd

.3 EV1 .15 T4 1st

.4 Blank .16 T4 2nd

.5 EV2 .17 T5 1st

.6 Blank .18 T5 2nd

.7 EV3 .19 PID

.8 Blank .20 None（Skip）

.9 T1 1st .21 9.5.

.10 T1 2nd .22 9.5.to

.11 T2 1st

SDC36（Please refer to the manual of yamatake SDC36 for details）

Device Bit Address Word Address Format Notes

Data Register ———— 4X 0-65535 DDDDD

DMC（Please refer to the manual of DMC-SPL for details, in 10-8 communication parameters）

Device Bit Address Word Address Format Notes

Data Register ———— 4X 1002-65535 DDDDD

Address add 1 to the list of

communication parameters

Example: ch1 pv is according to 4x1005 in the EV5000.

1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 257 258

Sin comentarios

Siemens KDN Series Instrucciones de operaciones Pagina 243