Siemens KDN Series Instrucciones de operaciones Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 258
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
KINCO
27
Set OK, then Update.
Supported Device
ADAM-4017
Device Bit Address Word Address Format
Read Analog Input form Channel N
———
S_Channel 0-65535 DDDDD
Read Analog Input from all Channel
———
A_Channel 0-7 D
Configuration Status
———
Status 0-65535 DDDDD
Enable/disable Channels for Multiplexing
———
M_channel 0-65535 DDDDD
Read Channel Status
———
Channel_Status 0-65535 DDDDD
Read Version
———
Version 0-65535 DDDDD
Read Module Name
———
Name 0-65535 DDDDD
NoteOrder code refer to the ADAM-4107 manual
1 “Data type” of S_Channel and A_Channel is signed integer. Decimal digits is 2 when the power
supply is 500mv or 150mv, other conditions is 3.
2 “Data type” of other registers is HEXING
2M_channel$AA5VVAt the same time allow multiplexing.
Enter the decimal value in the range of 0 to 255, mapping hexadecimal (00-FF)
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 257 258

Comentarios a estos manuales

Sin comentarios