Siemens KDN Series Instrucciones de operaciones Pagina 251

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 258
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 250
KINCO
251
HMI Ethernet terminal
RJ45
Ethernet Hub or Switch
RJ45
1 RX+orange,white
4 BD4+ blue
5 BD4- blue,white
2 RX- orange
3 TX+ green,white
7 BD3brown,white
8 BD3- brown
6 TX- green
1 TX+ (orange,white)
2 TX- orange)
3 RX+ (green,white)
4 BD4+ (blue)
5 BD4- (blue,white)
6 RX- (green)
7 BD3+ (brown,white)
8 BD3- (brown)
Yaskawa MP2300Motion Controller
Serial Communication
Series CPU Link Module Driver
MP MP2300 RS232 on the CPU unit YASKAWA MP2300
System configuration
Series CPU Link Module COM Type Parameter Cable
MP MP2300 RS232 on the CPU unit RS232 Setting Your owner cable
Supported Device
Device Bit Address Word Address Format Notes
Coil MB0.0-4095.F ------ DDDD.H
Input Relay IB 0.0-FFF.F ------ HHHH.H
Hold Register ------ MW 0-65534 DDDDD
Input Register ------ IW 0-7FFF HHHH
NoteIB0.0-0.F are occupied by the system; IW0 is occupied by the system.
Communication Setting
Default communication: 19200, 8, even, 1; station: 1
Vista de pagina 250

Comentarios a estos manuales

Sin comentarios