Siemens Sinumerik 810T Manual de usuario descargar pdf (Pagina 70)

EMCO WINNC SINUMERIK 810/820 T SURVEY PAGES

G 2

DATA IMPORT

Data import.

DATA-IN START

(Start data input)

You start data input.

DATA IN-OUT

The data (part program, settable zero offsets, machine

data, R parameters, tool offset, PLC program, PLC

operator messages, PLC machine data, user

programs) are read in from an external device (e.g.

punched tape reader) or output to an external device

(e.g. printer).

Data input and output is handled via interface 1 or 2,

drive A, B or C or printer.

DATA OUT

You select data output. You decide the data type with

the subsequent softkeys. Using „START“ (in „PART

PROGRAM“ with „MAINPRG. START“ or

„SUBROUT. START“) you activate data output.

DEC-SBL YES-NO

(Decoding single block on-off)

With „YES“, the blocks are processed single. The

function is activatet at the end of the block in which

decoding takes place with the signal present (pro-

gram control).

DELETE

Using „DELETE“ you clear one or more part programs

in the program memory.

DELETE PRE-VER

not active

DIAGNOSIS

All current alarms are displayed separately as NC

alarms, PLC alarms, PLC alarms and PLC messages.

Other displays are for service purposes.

DIRECTORY

The following is displayed:

• The stored part program numbers

• The number of characters used

• The free memory space

DNC

Setting of the serial DNC interface.

DRF ASSIGNM

not active.

DRF YES-NO

not active.

DRY RUN YES-NO

With „YES“, the axes are traversed at the dry run

feedrate, not the programmed feedrate. The dry run

feedrate is set via setting data.

EDIT

EDIT leads to „SELECT PROGRAM“, „GUIDING“

and „SIMULATION“.

Editing means:

Input of a program into the memory or changing or

altering a program already in the memory.

ETX START

Output of the end of block character (end of text)

EXT ZO

not active

FEED

You select the G functions for the type of feed via

softkey. Preselect: softkey „GUIDING“.

GENERAL DATA

Select the path for workpiece programs and actual

language..

G FUNCT.

You select the G functions from groups G0 to G12 via

softkeys.

Preselect: „GUIDING“ softkey.

GUIDING

The operator guiding (operator prompting) speeds

up and simplifies the input of part programs. Apart

from geometric functions (G function, contour

definition) you can also input machining cycles and

technological functions (feedrate, spindle speed) via

softkeys.

I/O

Setting the serial interface.

LINE

You select the G functions for threading via softkeys.

LIST OF TOOLS

The location number and tool number of worn tools is

displayed.

MACH DATA

not active

MAINPRG. START

(Main program start)

You activate the output of part programs.

MAIN PROGRAM

The following is shown in the display which appears

if you press this softkey:

• the numbers of the main programs stored

• the number of characters taken up in memory

• the free memory capacity.

After "DATA OUT" or "DATA IMPORT" you can

select input or output of main programs with "MAIN

PROGRAM"

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 89 90

Comentarios a estos manuales

Sin comentarios

Siemens Sinumerik 810T Manual de usuario Pagina 70

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Siemens Sinumerik 810T