Siemens Sinumerik 810T Manual de usuario descargar pdf (Pagina 27)

EMCO WINNC SINUMERIK 810/820 T

C 7

OPERATING SEQUENCES

Input pattern for data output - printer

Data Output

• Press softkey DATA OUT.

• The screen shows the input pattern beside.

• With "Interface no. for data out" you can enter a

serial interface (1 or 2) or a drive (A, B or C).

• If you send data to disks, this data will be sent in

the same format as with output to the serial

interface. This data have to be read in with DATA

IMPORT and must not be copied directly into the

workpiece directory.

Input pattern for data output

Example: Program output

• Press softkey PART PROGRAM

• The screen shows the input pattern beside

• Enter below mainprogram resp. subprogram the

following numbers:

Begin: the first program to be sent

End: the last program to be sent

• Press softkey MAINPRG START resp. SUBROUT

START. This will start the send function of the

software.

• With the softkey STOP you can interrupt data

output at any time, with MAINPRG START resp.

SUBROUT START you restart data output with

the first program to be sent.

Input pattern for data output - part program

Print Data

• Press softkey DATA OUT

• The screen shows the input pattern beside.

• With "Interface no. for data out" you can enter P to

select a printer.

• Act like data output

Example: Zero offset output

You can select to put out zero offsets or coordinate

rotations.

Channel-no. 0: Output zero offsets

Channel-no. 1: Output coordinate rotation

Data output zero offset - rotation

WinNC Sinumerik T (c) EMCO

F3 F4 F5 F6 F7

AUTOMATIC

DATA OUTPUT

Available memory: 63548 Zeichen

Interface no. for data out:

Interface allocation:

1 = RTS-LINE

2 = RTS-LINE

TOOL-

OFFSET

ZERO-

OFFSET

MACH.

DATA

PART-

PROGRAM

PLC-

M-DATA

WinNC Sinumerik T (c) EMCO

F3 F4 F5 F6 F7

AUTOMATIC

DATA OUTPUT

Main program:

Begin: % 0

End: % 0

Subroutine:

Begin: L 0

End: L 0

Interface no. for data out: 2

Interface allocation: 1=RTS-LINE

2=RTS-LINE

EXT

START

MAINPRG

START

SUBROUT

START

STOP

AUTOMATIC

DATA OUTPUT ZERO OFFSET/ROTATION

Channel no.0

... ... ...

WinNC Sinumerik T (c) EMCO

AUTOMATIC

DATA OUTPUT

Available memory: 36987

Interface no. for data out: 1

...

WinNC Sinumerik T (c) EMCO

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 89 90

Comentarios a estos manuales

Sin comentarios

Siemens Sinumerik 810T Manual de usuario Pagina 27

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Siemens Sinumerik 810T