Siemens Sinumerik 810T Manual de usuario descargar pdf (Pagina 69)

EMCO WINNC SINUMERIK 810/820 T SURVEY PAGES

G 1

Survey Softkey Explanations

G: Survey Pages

ACTUAL BLOCK

(Current block)

The current block is the block currently being

processed. The display shows: The block before the

current block, the current block and the block after

the current block.

ADD. FUNCTION

(Additional function)

The additional functions (5th M Group) fixed by the

machine tool manufacturer are grouped together in

this function. Preselect: softkey „GUIDING“

AREA W-PIECE

(Work piece area)

You enter the simulation area, and the workpiece

dimensions.

AXIAL

You enter the setting data for the axes.

BLOCK END

You select the character for „Block End (LF)“ via

softkey.

Preselect: „GUIDING“ softkey.

BLOCK NUMBER

The block number is automatically generated by the

control in steps of five.

BLOCK SEARCH

Block search makes it possible to start the operation

at any point in the program. During block search, the

same calculations are carried out as in normal pro-

gram operation, however there is no axis movement.

BTR START

not active

CIRCLE

You select the G functions for circular interpolation

with this softkey.

Preselect: „GUIDING“ softkey (operator prompting).

CONTOUR

This function simplifies programming of workpiece

contours with the transfer of values directly from the

drawing and graphic displays.

You can select the following elements and combi-

nations:

• Line

• Line - circle

• Circle

• Circle - line

• Circle - circle

• 2 - point definition

• 2 - angle definition

COPY

You copy a part program and re-enter it into memory

under another program number.

CORR. BLOCK

(Correction block)

An error in the program is marked with the cursor

(correction pointer).

CURRENT PRG PTR

(current program pointer)

The display shows the subroutine nesting with number

of runs and actual block number of the subroutine.

CURRENT VALUES

The display shows the values valid for the current

operating sequence.

CYCLES

The following are displayed:

• The stored cycle numbers

• The number of characters used

• The free memory space

Cycles are protected subroutines which can be called

for frequently used technologies or for machine-

specific operations (stock removal cycles, drilling

cycles, tool change cycles).

The values required are defined as parameter assign-

ments before the cycles are called (cycle parameter

assignment).

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 89 90

Comentarios a estos manuales

Sin comentarios

Siemens Sinumerik 810T Manual de usuario Pagina 69

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Siemens Sinumerik 810T