Siemens SIMATIC FS600 Instrucciones de operaciones descargar pdf (Pagina 46)

Distributed Use of SIMATIC FS600 Laser Scanner in

Category 3 / SIL 2

Entry ID: 21330889

A&D Safety Integrated Page 46/51 AS-FE-I-010-V20-EN

21330889_as_fe_i_010_v20_en_lscanner.doc

6.4 Operating instructions

Prerequisites:

• Hardware configuration and sample code of the STEP 7 project are

available in the S7-CPU

• The laser scanner SIMATIC FS600 has been parameterized.

• Zone pair 1 has been set (via the two positioning switches)

• The PC adapter has not been connected

• Zone pair 1 is active

• No objects are currently in the detection zone of the

laser scanner SIMATIC FS600.

The table below demonstrates the function principle:

No. Action Result / Note

Press the push button ACK and

release it

Required before starting the “machine” for

the first time.

Press the START push button

and release it

Starting (switching on) the “machine”.

The indicator light goes on.

Place an object into the detection

zone

The “machine” stops.

The indicator light goes off.

Press the push button ACK and

release it

An acknowledgement is required after a

fault (detection zone interrupted).

Press the START push button

and release it

Starting (switching on) the “machine”.

The indicator light goes on.

Now use the two position

switches to switch from zone pair

1 to zone pair 2:

• FIELD_BIT0=“0“

• FIELD_BIT1=“1“

Zone pair 2 is now active.

The changeover must take place during

the time parameterized in the FB4

(network 5).

1 2 ... 41 42 43 44 45 46 47 48 49 50 51

Comentarios a estos manuales

Sin comentarios

Siemens SIMATIC FS600 Instrucciones de operaciones Pagina 46

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Siemens SIMATIC FS600