Siemens SIMATIC FS600 Instrucciones de operaciones descargar pdf (Pagina 25)

Distributed Use of SIMATIC FS600 Laser Scanner in

Category 3 / SIL 2

Entry ID: 21330889

A&D Safety Integrated Page 25/51 AS-FE-I-010-V20-EN

21330889_as_fe_i_010_v20_en_lscanner.doc

The wizard can also be used to specify which zone pairs can be changed

over. In the safety functional example, it is allowed to switch from zone pair

1 to 2 and from zone pair 2 to 1.

4.4 Function test

The inputs and outputs used can be checked with regard to their

functionality if the following conditions are met:

• the hardware components are wired

• the STEP 7 project was loaded into the S7-CPU

• the following file was transmitted to the laser scanner SIMATIC FS600:

as_fe_i_010_v10_code_plscanner.ls.

Inputs/outputs used

No. HW component Address Symbol Signal

(default

value)

Note

1 Push button (NO) E 0.0 START “0” Switches the indicator light on

2 Push button (NC) E 0.1 STOP “1” Switches the indicator light off

3 Push button (NO) E 1.0 ACK “0“ Acknowledgement

4 Position switch 1 (NC) E 2.0 SEN_FIELD1 “1“

5 Position switch 2 (NC) E 2.4 SEN_FIELD2 “1“

Defining which zone pair is active.

6 Actuator (indicator light) A 8.0 ACTUATOR “0” Simulates a hazardous machine.

“0“ signal: "Machine" is switched

off

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 50 51

Sin comentarios

Siemens SIMATIC FS600 Instrucciones de operaciones Pagina 25