Siemens ET8 Series Instrucciones de operaciones descargar pdf (Pagina 44)

Additional Information CLV61x Dual Port (PROFINET IO)

The other four LEDs indicate the network connection status:

7.7.1 Status of the "SF" LED

The "SF" LED indicates the internal status of the CDF600-22xx.

SF LED

(red)

Meaning

OFF

CLV61x Dual Port without internal error

Activation of the PROFINET interface

Flashing

"Flashing" was, for example, required by the HW configuration.

7.7.2 Status of the "BF" LED

The "BF" LED indicates the status of the PROFINET.

BF LED

(red)

Meaning

OFF

Data exchange OK, CLV61x Dual Port operates OK as PROFINET slave

No connection to PROFINET IO controller (PLC). No data exchange.

Possible reasons:

• Bus not connected

• Master not available / OFF

• Incorrect PROFINET name

• Wrong GSDML file used

• Wrong GSDML module selected

Flashing

(0.5 Hz)

• Parameterization / configuration error in IO controller, no data exchange

7.7.3 "P1 LNK/ACT" status LED

P1 LNK/ACT

LED

Meaning

OFF

CLV61x Dual Port is not connected to any active network; no data traffic

ON (green)

Active network connected

ON (orange)

LED flickers when the CLV61x Dual Port is sending or receiving data, data traffic

7.7.4 "P2 LNK/ACT" status LED

P2 LNK/ACT

LED

Meaning

OFF

CLV61x Dual Port

is not connected to any active network; no data traffic.

ON (green)

Active network connected

ON (orange)

LED flickers when the CLV61x Dual Port is sending or receiving data, data traffic.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Comentarios a estos manuales

Sin comentarios

Siemens ET8 Series Instrucciones de operaciones Pagina 44

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Siemens ET8 Series