Siemens ET8 Series Instrucciones de operaciones descargar pdf (Pagina 38)

Additional Information CLV61x Dual Port (PROFINET IO)

7.2 Quickstart CLV61x Dual Port –

Example with configuration with SOPAS ET

Quickstart describes the commissioning of the CLV61x Dual Port without GSDML configuration.

If not already done, the CLV61x Dual Port must concurrently be configured with SOPAS ET.

The procedure for this is identical to that under 8.1, except that the GSDML configuration page is not

necessary.

The configuration includes only these four modules and no configuration modules:

The remaining sequence for commissioning is identical from here on.

Following the PROFINET IO commissioning, it is appropriate to configure the sensor using SOPAS ET.

The connection for this can be made via USB or Ethernet Port 2111 (or 2112).

If no Handshake is to be used, this can be set in SOPAS ET under:

"Network Interfaces/ IOs /Profinet":

If the function module is to be used, the Handshake mode must be switched on immediately. See also

Chapter 5.1.1.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Sin comentarios

Siemens ET8 Series Instrucciones de operaciones Pagina 38