Siemens EF 83P Series Manual de instrucciones descargar pdf (Pagina 75)

5-3

5.2.2 Inspection before Power On:

(1) Make sure that the machine's power source is according

to machine requirement.

(2) Make sure power cable diameter is 14mm

, and correctly

connected phases.

(3) Make sure that outside grounding is installed.

(4) Make sure that the power supply side is fitted breaker

with sensitivity specification 30mA.

(5) Make sure the cabinet is well closed.

(6) Make sure all the foundation bolts are securely tightened.

(7) Make sure that fix brackets are removed.

(8) Make sure the chuck is tightly mounted, and there is

nothing loose.

(9) Make sure that lubrication oil is full in lubrication oil

tube.

(10) Make sure that hydraulic oil tank is already filled with

suitable quantity of oil.

(11) Make sure there is nothing loose on turret, and there is

not sliding dropped problem.

(12) Make sure that the limit switch which control axis travel

and dog are not loosen.

(13) Make sure that the spindle drive belt is assembled with

suitable tension.

(14) Check if oil pipe or coolant pipe have any breakage or

looseness.

(15) Make sure that the protecting guard and safety door are

well closed.

(16) Make sure that there is no irrelevant objects nearby.

(17) Make sure the EMERGENCY STOP switch button is at

OFF condition.

(18) Make sure all pressure indicator is at "0" position.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 112 113

Sin comentarios

Siemens EF 83P Series Manual de instrucciones Pagina 75