Siemens EF 83P Series Manual de instrucciones descargar pdf (Pagina 34)

2-1

2.1 Machine Introduction & Noise Level

2.1.1 Machine Introduction:

The CNC Lathe has been developed by Leadwell CNC machine

company’s many years efforts. It can work on turning metal

workpiece like cast iron, steel, aluminum, copper, stainless steel and

alloy steel. As for other material application, endures should contact

first with material supplier for relevant safety information for

application. But it’s not suitable for the work to produce dust,

corrosive liquid, and gas after cutting, if it’s required indeed, make

sure to contact Leadwell to help you to improve, don’t determine by

yourself to cause people’s death and environment hurt.

This machine’s main parts are spindle, spindle headstock, base,

saddle, turret, tailstock, guarding, X axis drive, Z axis drive,

hydraulic lubricant, coolant, chip conveyor, chip bucket, safe cover,

and CNC controller, they are all protected by hermetical cover to

protect the operator’s safety, but when technician of maintenance

take apart the guarding in order to repair machine, technician must

pay attention for safety at all time. The machine gas been protected

by software and mechanical devices in order to protect the operator’s

safety and keep machine’s normal operation.

About the machine turret, your can set different tools according

to what you need, and change tools by rotating way to make cutting.

In parts clipping, the main way is hydraulic chuck, and tailstock

center helps to clipping chuck, you can remove chuck to refit panel

or do two centers work if it’s necessary. When you do two centers

work, please notice not to cut from spindle to tailstock, because

tailstock centers are clipped by chuck, if hydraulic is not equal to

cutting, the parts will be back to change clipping situation, and it

will effect on parts accuracy.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 112 113

Sin comentarios

Siemens EF 83P Series Manual de instrucciones Pagina 34