Siemens EF 83P Series Manual de instrucciones descargar pdf (Pagina 15)

1-5

Air Supply:

(1) Use only clean and dry air.

(2) Make sure that the air source can supply the specified

volume of air.

Installation:

(1) To hoist the machine, be sure to follow the precautions

bellow.

1) Only an authorized technician should perform work

with the machine hoistion.

2) Use only wires, shackles, and jigs of the dimensions

specified in the manual. They must be strong enough

to support the weight of the machine.

3) Before hoisting the machine, make sure that each of

the units is fixed securely.

4) Before hoisting the machine, make sure that each of

the units is fixed securely.

5) Be sure that the machine is well balanced both

lengthwise and crosswise while hoisting the machine

slightly shove the floor.

6) When a plurality of workers are in operation, be sure

to call attention each other as necessary.

(2) If rust prevention coating is applied to the slideway

surfaces, it must be removed completely. If any rust

prevention coating is left on the slideway when the

machine power is turned ON, a servo alarm will occur.

(3) The carriage and cross slide are fixed in place with transit

clamps when the machine is shipped. Also, eyebolts are

used to hoist the machine. These clamps and eyebolts

must be removed before turning ON the power.

(4) After installing the machine, the machine must be leveled.

The machine's crown and distortion values must be

adjusted according to the Accuracy Test Results Chart

delivered with the machine.

(5) Keep the door interlock switch in the ON position.

Remove the key and store it in a safe place.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 112 113

Sin comentarios

Siemens EF 83P Series Manual de instrucciones Pagina 15