Siemens EF 7850 Series Especificaciones descargar pdf (Pagina 16)

Control via the Operator Panel 04/04

SINAMICS G130 - Operator Panel AOP30

5-14 Operating Manual

5.3 Operation Screen Menu

Description

The operation screen displays the most important status variables for the drive unit:

In its condition on delivery, it displays the operating status of the drive, the direction

of rotation, the time, as well as four drive variables (parameters) numerically and

two in the form of a bar display for continuous monitoring.

You can call up the operation screen in one of three ways:

1. After the power supply has been switched on and the system has ramped up.

2. If you do not make any entries for two minutes, the system calls up the

operation screen automatically.

3. By pressing the MENU key twice and then F5 "OK".

READY  12:25:30 S

NSET = 1450.000rpm F_OFF= 50.0Hz

PACTV= 235.0kW Udc = 620.0V

F2F1 F3 F4 F5

N_ACT[rpm ]

1450.0 0% 50% 100%

I_ACT[Aeff]

450.0 0% 50% 100%

If a fault occurs, the system automatically displays the fault screen (see 5.8).

In LOCAL control mode, you can choose to enter the setpoint numerically (F2:

setpoint).

Settings

When you choose Commissioning / service –> AOP settings –> Define operation

screen, you can adjust the display type and the values displayed as required.

See 5.6.3

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Sin comentarios

Siemens EF 7850 Series Especificaciones Pagina 16