Siemens CU240S DP Manual de usuario descargar pdf (Pagina 22)

SINAMICS G120

Inverter chassis units 0.37 kW to 132 kW (0.5 hp to 200 hp)

Memory card for Control Units

3/22

Siemens D 11.1 · 2008

■

Overview

The parameter settings for an inverter can be stored on the MMC

memory card. When the plant is serviced, it is immediately ready

for use again after, for example, replacement of the frequency in-

verter and transfer of the memory card data.

• Parameter settings can be written from the MMC memory card

to the inverter or saved from the inverter to the MMC memory

card.

• Up to 100 parameter sets can be stored.

• Supports standard commissioning without the use of addi-

tional commissioning tools (e.g. BOP and STARTER).

• How the MMC memory card is commissioned can be defined

by the user (parameter p8458):

- 0 = Parameter set 0 is never automatically downloaded from

the MMC (“never”)

- 1 = Parameter set 0 is downloaded once after PowerOn

(“once”)

- 2 = Parameter set 0 is always downloaded once after Power

On (“always”)

Note:

The MMC memory card is not required when the inverter is run-

ning and does not have to remain inserted.

Note:

The MMC memory card function is not integrated in the CU240E

Control Unit.

■

Selection and Ordering Data

■

Integration

Inserting the MMC memory card into the Control Unit

Control Unit with inserted MMC memory card

Order No.

MMC memory card

(not for the CU240E Control Unit)

6SL3254-0AM00-0AA0

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 81 82

Sin comentarios

Siemens CU240S DP Manual de usuario Pagina 22