Siemens COM32 Guía de usuario descargar pdf (Pagina 68)

Adding and Configuring Devices ION Setup User Guide

Creating custom module labels

ION Setup allows you to create custom labels for modules. To create a custom

label:

1. Right-click on the module icon you want to label.

2. Select Rename from the pop-up menu.

3. Type the new label into the Name box.

4. Click Send to send your changes to the device.

NOTE

The number of labels available on an ION meter is limited. You may want to restrict the use of custom

labels to output registers only (where they are typically more useful). See “Customizing ION module

output register labels” on page 70 for more information.

Resetting custom module labels to their default labels

To reset a custom module label to its default label (and allow other custom labels

to be created if you have run out of space):

1. Right-click on the icon of the module with the custom label you want to reset.

2. Select Rename from the pop-up menu.

3. Delete the custom label completely. You do not need to type the default label in

the field.

4. Click Send to send your changes to the device. The label is reset to the default.

Configuring an ION Module setup register

ION Setup lets you change the values for numeric bounded registers, enumerated

registers, and string setup registers. Setup registers that are not of these three

classes cannot be configured using ION Setup.

1. Double-click on the module you want to configure.

2. Select the Setup Registers tab.

3. The Parameters box lists all the setup registers of the selected module and their

settings. To change a setup register, select it and click Edit.

 If the selected setup register is a numeric bounded register, type a value into

the provided box and click OK.

 If the selected setup register is an enumerated register, select an option

from the list and click OK.

 If the selected setup register is a string register, type the string in the

provided box and click OK.

4. Click Send to send your changes to the device.

Linking ION modules

ION Setup lets you link the output register of an ION module to the input register of

another ION module on the same device. This operation must be performed before

reconfiguring ION devices.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 125 126

Sin comentarios

Siemens COM32 Guía de usuario Pagina 68