Siemens COM32 Guía de usuario descargar pdf (Pagina 59)

ION Setup User Guide Adding and Configuring Devices

 IP Port: This contains the port number of the device to which you are connected.

The following table lists the ports used for Ethernet communications:

1 Some meters support email (SMTP through port 25) and webpages (HTTP through port 80).



Group: This box displays the name of the group that the meter belongs to.

Display

 Template Type: This displays the type of template for the device.

 Template Options: This lets you select which template ION Setup uses to

display data.

Tools

 Poll Device: To enable polling of the device, make sure this box is ticked.

 Device Setup: Choose whether to display basic ION Setup or advanced

ION Setup parameters.

 Show Basic: Displays the available setup parameters you can configure for

the device. Some devices are configured using Setup Assistant — refer to

“Using the Setup Assistant” on page 73 for details.

 Show Advanced: Displays all available modules in the selected ION

device. This option is only available on devices that are designed and built

using the ION architecture.

TIP

For devices that support Advanced Configuration mode, hold down CTRL and click the meter icon to

switch between Basic Configuration mode and Advanced Configuration mode.



Store to File: This lets you save the current device configuration to a .dcf file.

 Restore from File: This lets you upload a different .dcf configuration file to the

device.

 Firmware Upgrade: This lets you upgrade the device’s firmware.

IP Port

Description

502 Modbus TCP

7700 ION (direct)

7701 Modbus RTU over Ethernet

23 Telnet (used for meter diagnostics)

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 125 126

Sin comentarios

Siemens COM32 Guía de usuario Pagina 59