Siemens IP-Module Especificaciones Pagina 150
- Pagina / 210
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Application in combination with TCP/IP CP143 H1 / TCP/IP manual
5-70 Rev. 00/07
5.11.6 Test program for TCP/IP-Connections
The name of the test program is TCPEVAL.EXE. This program is only compatible with Windows
95.
You may use so-called PING-applications for tests under Windows 3.x. These applications can be used
to send a PING to a host computer and this will answer if the installation is OK.
Start the test program for Win 95:
Insert the supplied diskette (SSN-SW893, Disk 1) into drive A:.
Go to the START-menu and select RUN.
Enter the following: A:\TCPEVAL andclickon<OK>.
The test program starts and displays the following window:
Fig. 5-31: Test program "Connect"
The menu has the form of pages in a file. You can bring any page to the foreground by clicking on
the tab with the left mouse key.
File tabs
Connect Contains the status indicators for the connection and your own IP-
address.
ReadA Configuration of a READ AKTIV-connection (FETCH).
WriteA Configuration of a WRITE AKTIV-connection.
Receive Configuration of a RECEIVE-job.
Send Configuration of a SEND-job.
System Control window for requesting the status and to change RUN/STOP on
the CP.
- CP143 H1 / TCP/IP 1
- About this manual 4
- Contents 5
- Rev. 00/07 i-3 7
- Lerrzeichen 10
- 1 Introduction 11
- 1-2 Rev. 00/07 12
- 1.2 General 13
- 1.3 Operation 14
- 1.4 Construction 14
- 2 Communication protocols 15
- 2.1.2 Operation 18
- 2.2 TCP/IP protocol 19
- 2-4 Rev. 00/07 20
- Rev. 00/07 2-5 21
- 2-6 Rev. 00/07 22
- 2.2.3 TCP/IP services 23
- 3 Network planning 25
- LerrzeicLerrzeichenhen 26
- 3-2 Rev. 00/07 28
- Rev. 00/07 3-3 29
- CP 143 H1 / TCP/IP 30
- Rev. 00/07 3-5 31
- 3-6 Rev. 00/07 32
- Coaxial cable 33
- 3-8 Rev. 00/07 34
- 3-10 Rev. 00/07 36
- Rev. 00/07 3-11 37
- 3-12 Rev. 00/07 38
- Rev. 00/07 3-13 39
- 3-14 Rev. 00/07 40
- Rev. 00/07 3-15 41
- 3.5 Twisted Pair 42
- Rev. 00/07 3-17 43
- 3.6 Planning a network-layout 44
- Rev. 00/07 3-19 45
- 3-20 Rev. 00/07 46
- Rev. 00/07 4-1 49
- 4-2 Rev. 00/07 50
- 4.1.2 Jumper settings 51
- 4-4 Rev. 00/07 52
- 4.1.3 Sockets and plugs 53
- 4-6 Rev. 00/07 54
- Rev. 00/07 4-7 55
- Base connector X1 56
- Base connector X2 56
- Rev. 00/07 4-9 57
- 4.2 The CP143plus firmware 58
- Dual-port-Ram (DPR) 59
- 4-12 Rev. 00/07 60
- Rev. 00/07 4-13 61
- 4.3 CP143 TCP/IP firmware 62
- Dual-port-RAM (DPR) 63
- 4-16 Rev. 00/07 64
- Rev. 00/07 4-17 65
- 4-18 Rev. 00/07 66
- Rev. 00/07 4-19 67
- 4-20 Rev. 00/07 68
- Rev. 00/07 4-21 69
- 4-22 Rev. 00/07 70
- Rev. 00/07 4-23 71
- 4-24 Rev. 00/07 72
- Rev. 00/07 4-25 73
- 4-26 Rev. 00/07 74
- Rev. 00/07 4-27 75
- Indicators for SEND 76
- Indicators for RECEIVE 76
- Rev. 00/07 4-29 77
- 4-30 Rev. 00/07 78
- 5 Software 79
- 5-2 Rev. 00/07 82
- Rev. 00/07 5-3 83
- 5-4 Rev. 00/07 84
- 5.4 Using on-line help 85
- 5.5 The base file 86
- 5.5.2 Printing the base file 87
- 5-8 Rev. 00/07 88
- Rev. 00/07 5-9 89
- 5-10 Rev. 00/07 90
- Rev. 00/07 5-11 91
- 5-12 Rev. 00/07 92
- 5.6 Initialization 93
- 5-14 Rev. 00/07 94
- 5.6.2 Online 95
- 5.6.3 System configuration 96
- 5.7 Real-time clock functions 97
- 5-18 Rev. 00/07 98
- Rev. 00/07 5-19 99
- 5-20 Rev. 00/07 100
- Rev. 00/07 5-21 101
- 5-22 Rev. 00/07 102
- Rev. 00/07 5-23 103
- 5-24 Rev. 00/07 104
- Rev. 00/07 5-25 105
- 5-26 Rev. 00/07 106
- 5.8.3 Indirect addressing 107
- 5-28 Rev. 00/07 108
- 5.8.4 Multi-connections 109
- 5-30 Rev. 00/07 110
- 5.8.5 List of connections 111
- number determines 112
- Range: 1 to 199 112
- 5.9 General test functions 113
- 5.9.2 Anzw Dump 114
- Rev. 00/07 5-35 115
- 5-36 Rev. 00/07 116
- Rev. 00/07 5-37 117
- 5-38 Rev. 00/07 118
- Rev. 00/07 5-39 119
- 5-40 Rev. 00/07 120
- Rev. 00/07 5-41 121
- 5.10.1 Initialization 122
- Rev. 00/07 5-43 123
- 5-44 Rev. 00/07 124
- Rev. 00/07 5-45 125
- 5-46 Rev. 00/07 126
- Rev. 00/07 5-47 127
- 5-48 Rev. 00/07 128
- Rev. 00/07 5-49 129
- be supplied in the 130
- Rev. 00/07 5-51 131
- 5.10.3 Test functions 132
- 5.11.1 Initialization 133
- 5-54 Rev. 00/07 134
- Rev. 00/07 5-55 135
- 5-56 Rev. 00/07 136
- Rev. 00/07 5-57 137
- Rev. 00/07 5-59 139
- 5-60 Rev. 00/07 140
- Rev. 00/07 5-61 141
- 5-62 Rev. 00/07 142
- number must be 143
- 5-64 Rev. 00/07 144
- 5.11.3 Test functions 145
- 5-66 Rev. 00/07 146
- Rev. 00/07 5-67 147
- 5-68 Rev. 00/07 148
- Rev. 00/07 5-69 149
- 5-70 Rev. 00/07 150
- Rev. 00/07 5-71 151
- 5-72 Rev. 00/07 152
- Rev. 00/07 5-73 153
- 5-74 Rev. 00/07 154
- Rev. 00/07 5-75 155
- 5-76 Rev. 00/07 156
- H1 / TCP/IP manual Software 157
- WRITE job FETCH job 157
- H1 / TCP/IP manual 158
- 6 Commissioning 159
- LerrzLerrzeicheneichen 160
- Rev. 00/07 6-3 163
- Q 304/314 interface 165
- 6.2 Start-up properties 167
- 6.2.2 Status indicators 168
- 6.3 PLC programming 169
- 6.3.2 Programming 170
- 6.4 Example 171
- 6.4.2 Problem 172
- Rev. 00/07 6-13 173
- 6.4.3 Programs for the PLCs 174
- Rev. 00/07 6-15 175
- 6-16 Rev. 00/07 176
- Rev. 00/07 6-17 177
- 6-18 Rev. 00/07 178
- Rev. 00/07 6-19 179
- 6-20 Rev. 00/07 180
- Rev. 00/07 6-21 181
- Station 1 182
- Station 2 182
- Rev. 00/07 6-23 183
- 6-24 Rev. 00/07 184
- Rev. 00/07 6-25 185
- 6-26 Rev. 00/07 186
- 6-28 Rev. 00/07 188
- Rev. 00/07 6-29 189
- 6-30 Rev. 00/07 190
- Rev. 00/07 6-31 191
- 6-32 Rev. 00/07 192
- Appendix 193
- A-2 Rev. 00/07 196
- Rev. 00/07 B-1 197
- B-2 Rev. 00/07 198
- Rev. 00/07 B-3 199
- B-4 Rev. 00/07 200
- Rev. 00/07 C-1 201
- C-2 Rev. 00/07 202
- Rev. 00/07 D-1 203
- D-2 Rev. 00/07 204
- Rev. 00/07 E-1 205
- E-2 Rev. 00/07 206
- Rev. 00/0 F-1 207
- F-2 Rev. 00/07 208
- Rev. 00/0 F-3 209
- F-4 Rev. 00/07 210
Relacionado con productos y manuales para Detectores de humo Siemens IP-Module
(57 paginas)
Detectores de humo Siemens BH17 7ER Especificaciones
(83 paginas)
(83 paginas)
Detectores de humo Siemens IP-Module Manual
(360 paginas)
(360 paginas)
Detectores de humo Siemens BH17 7ER Especificaciones
(120 paginas)
(120 paginas)
Detectores de humo Siemens FS-250 Manual de usuario
(20 paginas)
(20 paginas)
Detectores de humo Siemens FS-250 Especificaciones
(14 paginas)
(14 paginas)
Detectores de humo Siemens FS-250 Especificaciones
(34 paginas)
(34 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.059 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales