Siemens IP-Module Especificaciones Pagina 14
- Pagina / 210
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Operation CP143 H1 / TCP/IP manual
1-4 Rev. 00/07
1.3 Operation
The CP143 H1 / TCP/IP communication module is installed directly into the central processor or
into the respective expansion unit. The module contains four interfaces:
• Interface for the LAN cable via a transceiver (AUI, DIX)
• Interface for the LAN cable via thin ethernet cable
• Interface for the LAN cable via RJ45-socket (twisted pair)
• Interface for compatibility with the programmer or a DIN interface for configuration
purposes
The CP143 H1 / TCP/IP communication processor conducts the transfer of data via the cellular
network independently and relieves the CPU of this task. This operation covers the entire ISO-OSI
level model.
The VIPA CP143 H1 / TCP/IP module is controlled by the standard handler modules of the
installed PLC.
The following modules are required for interfacing with the VIPA CP143 H1 / TCP/IP:
SEND ALL, RECEIVE ALL, SYNCHRON, SEND DIREKT, RECEIVE DIREKT, FETCH.
These function modules can be used to transfer DB/DX-modules with a maximum length of
4096 DW. These function modules can be configured directly or indirectly.
Special features
• The CP143 H1 / TCP/IP communication processor is supplied complete with a 12V power
supply for the transceiver.
• The application of these modules does not require any hardware or software manipulation.
• Comes complete with thin ethernet interface.
• Contains a LED status indicator to display the operating status of the module and the
network.
1.4 Construction
• 80486 SLC 33 MHz CPU
• 1MBmainmemory
• Siemens CP1430 compatible programmer interface
• EPROM socket for EPROMs
• 4 KB Dual-Port-RAM as CP interface
• DIN interface for the PLC
• AUI interface (IEEE 802.3) for the LAN cable via a transceiver, RJ45 signal may be
connected to the AUI socket (Siemens compatible)
• RJ45 connector for ethernet
• Thin ethernet (BNC)
- CP143 H1 / TCP/IP 1
- About this manual 4
- Contents 5
- Rev. 00/07 i-3 7
- Lerrzeichen 10
- 1 Introduction 11
- 1-2 Rev. 00/07 12
- 1.2 General 13
- 1.3 Operation 14
- 1.4 Construction 14
- 2 Communication protocols 15
- 2.1.2 Operation 18
- 2.2 TCP/IP protocol 19
- 2-4 Rev. 00/07 20
- Rev. 00/07 2-5 21
- 2-6 Rev. 00/07 22
- 2.2.3 TCP/IP services 23
- 3 Network planning 25
- LerrzeicLerrzeichenhen 26
- 3-2 Rev. 00/07 28
- Rev. 00/07 3-3 29
- CP 143 H1 / TCP/IP 30
- Rev. 00/07 3-5 31
- 3-6 Rev. 00/07 32
- Coaxial cable 33
- 3-8 Rev. 00/07 34
- 3-10 Rev. 00/07 36
- Rev. 00/07 3-11 37
- 3-12 Rev. 00/07 38
- Rev. 00/07 3-13 39
- 3-14 Rev. 00/07 40
- Rev. 00/07 3-15 41
- 3.5 Twisted Pair 42
- Rev. 00/07 3-17 43
- 3.6 Planning a network-layout 44
- Rev. 00/07 3-19 45
- 3-20 Rev. 00/07 46
- Rev. 00/07 4-1 49
- 4-2 Rev. 00/07 50
- 4.1.2 Jumper settings 51
- 4-4 Rev. 00/07 52
- 4.1.3 Sockets and plugs 53
- 4-6 Rev. 00/07 54
- Rev. 00/07 4-7 55
- Base connector X1 56
- Base connector X2 56
- Rev. 00/07 4-9 57
- 4.2 The CP143plus firmware 58
- Dual-port-Ram (DPR) 59
- 4-12 Rev. 00/07 60
- Rev. 00/07 4-13 61
- 4.3 CP143 TCP/IP firmware 62
- Dual-port-RAM (DPR) 63
- 4-16 Rev. 00/07 64
- Rev. 00/07 4-17 65
- 4-18 Rev. 00/07 66
- Rev. 00/07 4-19 67
- 4-20 Rev. 00/07 68
- Rev. 00/07 4-21 69
- 4-22 Rev. 00/07 70
- Rev. 00/07 4-23 71
- 4-24 Rev. 00/07 72
- Rev. 00/07 4-25 73
- 4-26 Rev. 00/07 74
- Rev. 00/07 4-27 75
- Indicators for SEND 76
- Indicators for RECEIVE 76
- Rev. 00/07 4-29 77
- 4-30 Rev. 00/07 78
- 5 Software 79
- 5-2 Rev. 00/07 82
- Rev. 00/07 5-3 83
- 5-4 Rev. 00/07 84
- 5.4 Using on-line help 85
- 5.5 The base file 86
- 5.5.2 Printing the base file 87
- 5-8 Rev. 00/07 88
- Rev. 00/07 5-9 89
- 5-10 Rev. 00/07 90
- Rev. 00/07 5-11 91
- 5-12 Rev. 00/07 92
- 5.6 Initialization 93
- 5-14 Rev. 00/07 94
- 5.6.2 Online 95
- 5.6.3 System configuration 96
- 5.7 Real-time clock functions 97
- 5-18 Rev. 00/07 98
- Rev. 00/07 5-19 99
- 5-20 Rev. 00/07 100
- Rev. 00/07 5-21 101
- 5-22 Rev. 00/07 102
- Rev. 00/07 5-23 103
- 5-24 Rev. 00/07 104
- Rev. 00/07 5-25 105
- 5-26 Rev. 00/07 106
- 5.8.3 Indirect addressing 107
- 5-28 Rev. 00/07 108
- 5.8.4 Multi-connections 109
- 5-30 Rev. 00/07 110
- 5.8.5 List of connections 111
- number determines 112
- Range: 1 to 199 112
- 5.9 General test functions 113
- 5.9.2 Anzw Dump 114
- Rev. 00/07 5-35 115
- 5-36 Rev. 00/07 116
- Rev. 00/07 5-37 117
- 5-38 Rev. 00/07 118
- Rev. 00/07 5-39 119
- 5-40 Rev. 00/07 120
- Rev. 00/07 5-41 121
- 5.10.1 Initialization 122
- Rev. 00/07 5-43 123
- 5-44 Rev. 00/07 124
- Rev. 00/07 5-45 125
- 5-46 Rev. 00/07 126
- Rev. 00/07 5-47 127
- 5-48 Rev. 00/07 128
- Rev. 00/07 5-49 129
- be supplied in the 130
- Rev. 00/07 5-51 131
- 5.10.3 Test functions 132
- 5.11.1 Initialization 133
- 5-54 Rev. 00/07 134
- Rev. 00/07 5-55 135
- 5-56 Rev. 00/07 136
- Rev. 00/07 5-57 137
- Rev. 00/07 5-59 139
- 5-60 Rev. 00/07 140
- Rev. 00/07 5-61 141
- 5-62 Rev. 00/07 142
- number must be 143
- 5-64 Rev. 00/07 144
- 5.11.3 Test functions 145
- 5-66 Rev. 00/07 146
- Rev. 00/07 5-67 147
- 5-68 Rev. 00/07 148
- Rev. 00/07 5-69 149
- 5-70 Rev. 00/07 150
- Rev. 00/07 5-71 151
- 5-72 Rev. 00/07 152
- Rev. 00/07 5-73 153
- 5-74 Rev. 00/07 154
- Rev. 00/07 5-75 155
- 5-76 Rev. 00/07 156
- H1 / TCP/IP manual Software 157
- WRITE job FETCH job 157
- H1 / TCP/IP manual 158
- 6 Commissioning 159
- LerrzLerrzeicheneichen 160
- Rev. 00/07 6-3 163
- Q 304/314 interface 165
- 6.2 Start-up properties 167
- 6.2.2 Status indicators 168
- 6.3 PLC programming 169
- 6.3.2 Programming 170
- 6.4 Example 171
- 6.4.2 Problem 172
- Rev. 00/07 6-13 173
- 6.4.3 Programs for the PLCs 174
- Rev. 00/07 6-15 175
- 6-16 Rev. 00/07 176
- Rev. 00/07 6-17 177
- 6-18 Rev. 00/07 178
- Rev. 00/07 6-19 179
- 6-20 Rev. 00/07 180
- Rev. 00/07 6-21 181
- Station 1 182
- Station 2 182
- Rev. 00/07 6-23 183
- 6-24 Rev. 00/07 184
- Rev. 00/07 6-25 185
- 6-26 Rev. 00/07 186
- 6-28 Rev. 00/07 188
- Rev. 00/07 6-29 189
- 6-30 Rev. 00/07 190
- Rev. 00/07 6-31 191
- 6-32 Rev. 00/07 192
- Appendix 193
- A-2 Rev. 00/07 196
- Rev. 00/07 B-1 197
- B-2 Rev. 00/07 198
- Rev. 00/07 B-3 199
- B-4 Rev. 00/07 200
- Rev. 00/07 C-1 201
- C-2 Rev. 00/07 202
- Rev. 00/07 D-1 203
- D-2 Rev. 00/07 204
- Rev. 00/07 E-1 205
- E-2 Rev. 00/07 206
- Rev. 00/0 F-1 207
- F-2 Rev. 00/07 208
- Rev. 00/0 F-3 209
- F-4 Rev. 00/07 210
Relacionado con productos y manuales para Detectores de humo Siemens IP-Module
(57 paginas)
Detectores de humo Siemens BH17 7ER Especificaciones
(83 paginas)
(83 paginas)
Detectores de humo Siemens IP-Module Manual
(360 paginas)
(360 paginas)
Detectores de humo Siemens BH17 7ER Especificaciones
(120 paginas)
(120 paginas)
Detectores de humo Siemens FS-250 Manual de usuario
(20 paginas)
(20 paginas)
Detectores de humo Siemens FS-250 Especificaciones
(14 paginas)
(14 paginas)
Detectores de humo Siemens FS-250 Especificaciones
(34 paginas)
(34 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales