Siemens CCIS1337-LP Manual de usuario descargar pdf (Pagina 36)

Configuration

Siemens Building Technologies

Fire Safety & Security Products 04.2006

10.5 Configuring camera settings

10.5.1 Configuring day/night settings

1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page.

2. In the Configuration menu, select the menu option Camera and the

Day/Night Settings suboption.

Î The Day/Night Settings dialog appears.

Fig. 7 Day/night settings

3. Enter the desired settings in this dialog.

D/N mode The day/night function offers the options “Auto”, “Color” and “Mono” (black/white).

External control can also be used to switch between color and black/white..

z AUTO

With this settings, the IP camera switches to color or black/white recording depending

on the brightness of an object’s environment. (If the GAIN is set to OFF, the automatic

function is not available.)

z MONO

The IP camera remains in black/white mode with this setting.

z COLOR

The IP camera remains in color mode with this setting.

z MANUAL

In this operating mode, the IP camera is set manually to color or black/white if a

corresponding signal is applied to the terminal (B/W) on the back.

D/N level Prerequisite:

This setting is only relevant if the AUTO option has been selected for D/N mode.

z LOW

The switching point from color to black/white mode occurs at a brightness of 1 lux.

z STANDARD

The switching point from color to black/white mode occurs at a brightness of 2 lux.

z HIGH

The switching point from color to black/white mode occurs at a brightness of 4 lux.

D/N delay Prerequisite:

This function is only in effect if the AUTO option has been selected for D/N mode.

This allows the delay time for th day/night function to be set.

Select 0, 5, 10, 15 or 20 seconds as the delay time for day/night switching.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

Sin comentarios

Siemens CCIS1337-LP Manual de usuario Pagina 36