Siemens NRN 67 Series Especificaciones descargar pdf (Pagina 84)

RSSB Page 84 of 87

GSM-R user procedures (cab radio Version 2)

Displayed message

Meaning

Possible causes

Solution

Failed to terminate

You have failed to end an ongoing

call.

There could be several reasons for this

however the cab radio is not able to

distinguish between them.

Press the cancel (X) button once to

clear the failure message and again

to try to clear the call.

Not lead driver

(Multiparty calls)

A driver, other than the lead driver

on a train with more than one driver

registered has tried to make a

multiparty call to the other drivers,

which is not allowed.

As shown to the left.

Action not allowed. Only the lead

driver can set up a multiparty call.

No other drivers

(Multiparty calls)

A driver has tried to make a

multiparty call to other drivers on a

train where there are no other cab

radios registered.

Driver 2 has not yet registered.

Wait and retry when driver 2 has

registered.

No PA Attached

A user-initiated test (from the test

menu) has failed to find the PA

system.

There is no PA system attached.

Do not attempt to test the PA.

Radio failure:

During self-test or background

testing the cab radio has detected a

fatal failure.

A number of possible causes.

Attempt to re-boot the radio by

tripping and resetting the GSM-R

MCB.

Registration failed

The registration attempt has failed.

There are several reasons why

registration may have failed depending

on the circumstances.

See section 9.3.1 and following

examples below.

1 2 ... 79 80 81 82 83 84 85 86 87

Comentarios a estos manuales

Sin comentarios