Siemens ET 790 Series Información técnica descargar pdf (Pagina 237)

GAMMA wave Radio System

Devices for Special Applications

Sun protection, anti-glare protection,

utilization of daylight

17/19

Siemens ET G1 · 10/2008

■

Technical specifications

GAMMA wave flush-mounting combinations

See Catalog ET D1.

Type Description

GE 520 GE 520 wave shutter/blind actuators

1 x 230 V AC, 6 A

• KNX radio transmitter/receiver for 868 MHz

• For control of a solar protection drive with AC motor for

230 V AC and electromechanical limit switches

• Electrically interlocked relays for reversing direction of rotation

• Relay contacts for rated voltage 230 V AC, 6 A

• Electronics powered over 230 V AC

• Commissioning over a pushbutton located on the top - no

additional aids required

• Dimensions (H x W x L): 42 x 32 x 274.5 mm

Shutter/blind control sys inserts

Flush mounting

• For control of sun/anti-glare protection drive for 230 V AC with

mechanical or electronic limit switches, rated operational

voltage 230 V AC, rated operational capacity 1 motor with max.

1000 VA, with 2 relays which are interlocked against each other

with a minimum switchover time of approx. 1 s

• Secondary input for additional operation over conventional

UP/DOWN pushbuttons, with safety function "wind alarm",

which can be implemented through the secondary input "UP"

• 10-pole socket for plugging in a UP 211 wave shutter/blind

pushbutton for local and remote control over KNX radio

• For mounting in an installation box (

∅

60 mm, depth: 40 mm)

with screw or claw fixing

• Dimensions (H x W x D): 71 x 71 x 32 mm

AP 260 AP 260 wave door/window contacts

With battery, surface mounting

• For detecting the state (closed/open) of a door or window over

the reed contact integrated in the device, with actuation of the

reed contact through the supplied magnet for attachment to the

moving part of the door or window

• Connection for an external floating contact

• Transmission of the switching state to a shutter/blind sys insert

with clipped on wave shutter/blind pushbutton or to the wave

Touch Manager

• 4 plug-in terminals for wire cross-sections of 0.14 ... 0.5 mm

(solid or finely stranded) for connection of the external contact

and for setting through a wire jumper, whether monitoring is to

cover internal contact only, external contact only, or both

contacts

• KNX radio transmitter for 868 MHz

• Electronics powered over a lithium battery (1/2 AA 3.6 V), with

a battery service life of approx. 5 years, with signaling of battery

status every 24 hours, with LED that flashes every 10 seconds

to indicate that the battery needs replacing

• Commissioning over a pushbutton located on the front of the

sensor - no additional aids required

• Surface mounting

• Comprising one mounting plate for screw or adhesive fixing,

clip-on radio sensor with integrated reed contact and trigger

magnet

• Dimensions (H x W x D):

Sensor 87 x 36 x 27 mm, magnet 40 x 10 x 10 mm

Operator interfaces

sys pushbuttons

UP 210 wave

pushbuttons

sys shutter/blind

pushbuttons

UP 211 wave shutter/

blind pushbuttons

instabus

pushbuttons,

single, double

Device inserts

Universal dimmer sys inserts

✔ ✔

-- -- --

sys switching inserts

✔

-- -- --

Shutter/blind control sys inserts

-- --

✔ ✔

UP 110 wall-mounted transmitters

"Batterie" wave

-- -- -- --

✔

UP 110 wall-mounted transmitters

230 V wave

-- -- -- --

✔

UP 560 wall-mounted transmitters

"Aktor" 230 V wave

-- -- -- --

✔

ET_G1_2009_en.book Seite 19 Freitag, 28. November 2008 9:50 09

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 291 292

Comentarios a estos manuales

Sin comentarios

Siemens ET 790 Series Información técnica Pagina 237

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Siemens ET 790 Series