Siemens SIMATIC PC Adapter TS Adapter Manual de usuario descargar pdf (Pagina 5)

Manual – MOVITOOLS® - Connection to SIMATIC S7 via MPI

The FC_MoviTools function

System Description

1.2 The FC_MoviTools function

The new

FC_MoviTools

STEP7 function is easy to integrate, so you can link your

SIMATIC S7 system to the MOVITOOLS

software from SEW-EURODRIVE.

The link to SEW-EURODRIVE drive inverters connected to PROFIBUS is established

using the

FC_MoviTools

function. MOVITOOLS

operates with the PROFIBUS address

set on the drive inverters using DIP switches.

On the PC side, MOVITOOLS

software communication via the SIMATIC Net PRO-

DAVE MPI driver is controlled in such a way that a link is established to SIMATIC S7 via

the MPI interface.

All the information about the communication link is stored in the SIMATIC S7 program.

As a result, any particular PC with MOVITOOLS

and the MPI interface can access the

drive data, even without SIMATIC S7 project information (→ Figure 1).

52138AXX

Figure 1: Example of a network connected via MPI interface

[1] SIMATIC S7 PG or standard PC with MPI or CP5611/5511

[2] MPI connection

[3] SIMATIC S7 with the

FC_MoviTools

function

PROFIBUS DP/DPV1

ool

[2]

[1]

[3]

1 2 3 4 5 6 7 8 9 10 ... 31 32

Sin comentarios

Siemens SIMATIC PC Adapter TS Adapter Manual de usuario Pagina 5