Siemens TL.. Manual de instrucciones descargar pdf (Pagina 25)

Operating Instructions

Manipulating the Moveable Drawout Element

CAUTION

Test Position to Connected Position

To rack the moveable drawout element from the Test position

to the Connected position.

1. Push in the directional shift lever. This is the racking-in position.

2. Pull the release lever down to the release-disengaged position.

(Illustrated beneath padlock device.) If the breaker contacts are

closed, pulling the release lever down will trip the breaker.

3. Pump the racking pump handle until the moveable drawout element

is in the Connected position.

4. As soon as the moveable drawout element is racked from the Test

position, the position indicator will display that the moveable

drawout element is in the Connected position. However, the move-

able drawout element will not be completely in the Connected

position until the release lever has automatically returned to the

release-engaged position. Push the side rails back into the stored

position.

To avoid damaging the racking

mechanism, always pull the release lever

before racking the moveable drawout

element.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 65 66

Sin comentarios

Siemens TL.. Manual de instrucciones Pagina 25