Siemens SIMATIC TI505 Manual de usuario Pagina 84

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 91
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 83
Using the MODASST Program
D-5
SIMATIC TI505/TI500 MODNIM User Manual
D.3 Using Program Options
Figure D-2
shows the first menu and the sub-menu available after pressing
ALT
S to choose the Setups option from the top menu. Y
ou can also press
F10 to access the top menu, and, since Setups is the default, press
Enter
.
Alt-X Exit F10 Top
Menu
Press F1
for Help
Direct
Host to MODNIM
Modem connection to MODNIM
Gateway Direct Host Connection
Gateway Modem Host Connection
TIWA
Y Connection
Setups Run Diags F
ind Module Settings
T
alk to Module
B
atch, Send from File
Port
Setup
Communications Parameters
Dip Switch Setup
Cable Pin-Outs
Figur
e D-2
MODASST
Setup Menu
Under Setups, you can choose one of the following options.
Port
Setup
allows you to change the computer Com Port that you
selected when the program started.
Communications
Parameters
allows you to reset the parameters to
communicate with the MODNIM or TIW
A
Y Gateway module.
Dip
Switch Setup
displays the dipswitches that need to be selected to
configure the MODNIM or TIW
A
Y Gateway module for the settings
chosen using the Parameters option.
Cable Pin-Outs
displays the cable pin-outs required to connect the
MODNIM or TIW
A
Y Gateway modules to a host computer or a modem.
The Run Diags option lists the MODNIM diagnostics available using
function code 08. Y
ou can select and run a diagnostic function by using the
up/down arrows and pressing
Enter
. This option uses the communications
parameters selected on the Setup menu item to run diagnostics.
Setup Options
Run Diagnostics
Vista de pagina 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 90 91

Comentarios a estos manuales

Sin comentarios