Siemens SIMATIC TI505 Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 91
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
Installation and Set-up
1-12
SIMATIC TI505/TI500 MODNIM User Manual
Installing the MODNIM (continued)
You
can key the Series 500 MODNIM module to prevent another I/O module
from being inserted by mistake into the two slots reserved for the MODNIM
module.
T
o do this, insert the three keys provided in the right slot of the two slots
occupied by the module so that they fit into the notches in the edge card of
the module. (See Figure 1-9.)
To
avoid the possibility of personal injury, damage to the module,
altering the PLC memory
, or causing a PLC fatal error
, disconnect
power to the base’
s power supply and to any modules installed in
the base before inserting or removing the MODNIM or the I/O slot
keys.
Figure 1-9 Keying
the I/O Base Slot for the Series 500 MODNIM
Installing the
Series 500 MODNIM
in the I/O Base
WARNING
!
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 90 91

Comentarios a estos manuales

Sin comentarios