Siemens TC35 Terminal Especificaciones descargar pdf (Pagina 244)

TC35i AT Command Set

Confidential / Released

TC35i_ATC_V01.05 Page 244 of 278 04.08.2003

7.45 AT^SSDA Set Display Availability

Use the AT^SSDA command to specify whether your TC35i product is designed to provide a display.

If there is one available, AT^SSDA enables or disables the mobile station to present incoming

Class 0 short messages directly on the display. The command is not required for other short mes-

sage Classes.

Test command

AT^SSDA=?

Response

^SSDA: (list of supported <da>s)

Parameter

See write command

Read command

AT^ SSDA?

Response

^SSDA: <da> OK

Parameter

See write command

Write command

AT^SSDA=

<da>

Response

Parameter

<da>: display availability

0 the mobile station is not capable of displaying short messages

1 the mobile station is capable of displaying short messages

Please note that the setting is stored volatile, i.e. after restart or reset, the default

value 0 will be restored. Also, there is no way to store AT^SSDA to the user de-

fined profile.

Reference

Siemens

Note

· If a mobile station is able to display short messages, class 0 messages can be

displayed immediately. If the mobile station has no display, class 0 messages

shall be treated as though there was no message class. Refer to GSM 03.38.

· The only effect of AT^SSDA is to influence the behavior of the <mt> parameter

specified with AT+CNMI: If <da>=1 and <mt>=1, then Class 0 short messages

need to be acknowledged with AT+CNMA. See also Chapters 5.9 for CNMA,

5.10 for AT+CNMI and 5.16 for AT+CSMS.

· Multiplex protocol: If one instance is set to <da>=1 and <mt>=1, then all other

instances must be configured for <mt>=0.

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 277 278

Comentarios a estos manuales

Sin comentarios

Siemens TC35 Terminal Especificaciones Pagina 244

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Siemens TC35 Terminal