Siemens TC35 Terminal Especificaciones descargar pdf (Pagina 168)

TC35i AT Command Set

Confidential / Released

TC35i_ATC_V01.05 Page 168 of 278 04.08.2003

5.9 AT+CNMA New SMS message acknowledge to ME/TE, only phase 2+

Test command

AT+CNMA=?

Response

1) If text mode (+CMGF=1):

2) If PDU mode (+CMGF=0):

+CNMA: (list of supported <n>s) OK

Parameters

See execute command

Execute command

AT+CNMA

Write command

Only for PDU mode:

AT+CNMA=<n>

Response

The write / execute command confirms successful receipt of a new message

(SMS-DELIVER or SMS-STATUS-REPORT) which is routed directly to the

TE. TA shall not send another +CMT or +CDS result code to TE until previ-

ous one is acknowledged.

If ME does not receive acknowledgment within required time (network time-

out), ME sends RP-ERROR to the network. TA shall automatically disable

routing to TE by setting both <mt> and <ds> values of +CNMI to zero.

Note: The command shall o n l y be used when +CSMS parameter <ser-

vice> equals 1 (= phase 2+).

1) If text mode:

2) If PDU mode:

3) If error is related to ME functionality:

+CMS ERROR: <err>

Parameters

<n> 0 command operates similarly as defined for the text mode

Reference

GSM 07.05

Note

If multiplex mode is activated (+CMUX=0) the +CNMI parameter will be set to

zero on all channels, if one channel fails to acknowledge an incoming mes-

sage within the required time.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 277 278

Sin comentarios

Siemens TC35 Terminal Especificaciones Pagina 168