Siemens TC35 Terminal Especificaciones descargar pdf (Pagina 171)

TC35i AT Command Set

Confidential / Released

TC35i_ATC_V01.05 Page 171 of 278 04.08.2003

Reference

GSM 07.05

General remarks:

· The parameters <ra> and <tora> will only be displayed if AT^SSCONF=1 has

been set before. See Chapter 7.44 for details on AT^SSCONF.

· To allow SMS overflow presentation during data transfers via Break, use

AT+CNMI=3,1 (see Chapter 7.20, AT^SMGO).

· If either a short message or a Status Report is not acknowledged, all +CNMI

parameters will be set to zero on all channels.

Handling of Class 0 short messages:

· If the host application is provided with a display and AT^SSDA=1 has been set

Class 0 short messages can be displayed immediately. Refer to Chapter 7.45

for details.

· If the host application does not include a display, ME handles Class 0 short

messages as though there was no message class, i.e. it will ignore bits 0 and 1

in the TP-DCS and normal rules for exceeded memory capacity shall apply.

This approach is compliant with GSM 03.38.

Requirements specific to Multiplex mode:

· In multiplex mode (AT+CMUX=0) only one channel can use a phase 2+ pa-

rameter. The parameter for <mt> and <ds> on the other channels have to be

set to zero.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 277 278

Sin comentarios

Siemens TC35 Terminal Especificaciones Pagina 171