Siemens OSM Manual de usuario Pagina 80
- Pagina / 158
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Web-Based Management (WBM)
4-19
Industrial Ethernet OSM/ESM Network Management
C79000-G8976-C137-08
Standby Status
Passive:
The OSM/ESM is passive; in other words, it does not pass on any packets via the
standby ports.
Active:
The OSM/ESM is active; in other words, it passes on packets via the standby
ports.
RM Mode
Disabled:
The OSM/ESM is not operating as the redundancy manager (RM).
Enabled:
The OSM/ESM is operating as the redundancy manager (DIP switch set to “RM
on”).
RM Status
Passive:
The OSM/ESM is operating as the redundancy manager and has opened the ring;
in other words, the line of OSMs/ESMs attached to it (ports 7 and 8) is operating
without problems. The passive status is also indicated when the RM mode is
disabled.
Active:
The OSM/ESM is operating as the redundancy manager and has closed the ring;
in other words, the line of OSMs/ESMs attached to it (ports 7 and 8) is interrupted
(fault or error). The redundancy manager switches the link between ports 7 and 8
through and reestablishes a functioning bus configuration.
Power Line 1
Up: Power supply 1 (line 1) is applied.
Down: Power supply 1 is not applied or has a value less than
14 V.
Power Line 2
Up: Power supply 2 (line 2) is applied.
Down: Power supply 2 is not applied or has a value less than
18 V.
- Purpose of the Manual 6
- Scope of the Manual 6
- Notes for the Reader 7
- Finding Information 7
- Target Group 7
- Audience 8
- Further Support 9
- C79000-G8976-C137-08 10
- Introduction 13
- 1.1.1 Function 14
- Protocol 15
- Getting Information 15
- Making Settings 15
- 1.2.1 Signaling Concept 17
- 1.2.2 Network Management 17
- 1.3 Command Interpreter (CLI) 20
- 1.4 Setting the IP Addresses 20
- Important OSM/ESM Functions 21
- 2.1 Autonegotiation 22
- 2.2 Autocrossover 23
- Defaults 24
- Protected Settings 24
- Restore Factory Defaults 24
- 2.6 Locked Ports 28
- 2.7 Mirroring 29
- 2.8 Traps 30
- 2.9 E-Mail Function 31
- 2.10 Event Log Table 32
- 2.12 Flow Control 34
- 2.13 BOOTP/DHCP 35
- 2.15 TELNET 37
- Redundant Coupling 38
- 1 Fiber-optic cable (FO) 39
- 2 ITP XP standard cable 9/9 39
- 2.17 Observer Function 41
- Command Interpreter (CLI) 44
- 3.1 Overview 45
- 3.2 Password Protection 45
- 3.3 Installing the CLI 46
- 3.4 Login 47
- 3.5 CLI Commands 48
- CLI Menus and Description 49
- Start Menu 50
- System Menu 51
- Command CommentDescription 52
- OSM/ESM Menu 53
- Agent Menu 55
- Switch Menu 58
- Port Menu 60
- Service Menu 61
- Web-Based Management (WBM) 62
- 4.1 General Introduction 63
- 4.2 Requirements 64
- 4.3 Connecting 65
- Figure 4-2 “Login” Window 66
- Figure 4-3 WBM Startup Window 67
- Device Status Field 69
- Menu Tree 69
- Data Window 69
- 4.6 Management Menus 70
- 4.7 System 71
- 4.7.1 System Version Numbers 72
- Hardware 73
- Order Number 73
- Boot software 73
- Operative software 73
- MAC Address 73
- 4.7.2 System Restart 74
- 4.7.3 System Factory Defaults 75
- (restoring the defaults) 75
- 4.7.4 System Save & Load 76
- Log Table File 77
- Firmware File 77
- 4.7.5 Event Log Table 78
- 4.8 OSM/ESM Status 79
- Standby Status 80
- RM Status 80
- Power Line 1 80
- Power Line 2 80
- Fault Status 81
- 4.8.1 OSM/ESM Fault Mask 82
- Set New Values 83
- 4.8.2 OSM/ESM Standby Mask 84
- 4.8.3 OSM/ESM Counters 86
- 4.9 Agent Features 88
- E-Mail Address 92
- SMTP Server IP Address 92
- “From” Field 93
- 4.9.5 Agent ARP Table 95
- 4.9.6 Agent SNMP Counters 96
- 4.10 Switch Features 97
- Flow Control 98
- Set New Value 98
- 4.10.1 Current FDB Table 99
- Start with MAC 100
- Clear Address 100
- Next Values 100
- 4.10.2 Static FDB Table 101
- Entering a Multicast Address 105
- 4.11 Port Status 106
- Flow Ctrl 107
- 4.11.1 Port Configuration 108
- 4.12 Statistics Counters 110
- 4.12.1 Packet Size 111
- 4.12.2 Packet Type 112
- 4.12.3 Packet Error 113
- SNMP and RMON 114
- 5.1 SNMP 115
- 5.2 RMON 116
- 6.1 General Introduction 118
- Figure 6-1 119
- Figure 6-2 120
- Figure 6-3 120
- Figure 6-4 121
- Requirements 122
- Notes on Troubleshooting 124
- Internet Browser Settings 128
- Figure A-2 Trusted Sites 130
- A.2 Netscape Communicator 6.2 138
- Serial Port of the OSM/ESM 140
- Figure B-1 Properties Tab 142
- References 143
- Abbreviations/Acronyms 145
- Glossary 148
Relacionado con productos y manuales para Redes Siemens OSM
Redes Siemens OSM Instrucciones de operaciones
(98 paginas)
(98 paginas)
Redes Siemens CP 1515 Manual de servicio
(15 paginas)
(15 paginas)
Redes Siemens CL-010 Manual de usuario
(22 paginas)
(22 paginas)
Redes Siemens SL2-141 Manual de usuario
(24 paginas)
(24 paginas)
Redes Siemens 2614 Guía de usuario
(44 paginas)
(44 paginas)
Redes Siemens 5890 Manual de usuario
(18 paginas)
(18 paginas)
Redes Siemens PSFR-CP41 Especificaciones
(81 paginas)
(81 paginas)
Redes Siemens SIMATIC TIWAY 1 Manual de usuario
(107 paginas)
(107 paginas)
Redes Siemens SE105 Especificaciones
(115 paginas)
(115 paginas)
Redes Siemens SPC3 Manual de usuario
(11 paginas)
(11 paginas)
Redes Siemens SIMATIC NET CP 343-1 Manual de usuario
(68 paginas)
(68 paginas)
Redes Siemens DTU3005-B Especificaciones
(88 paginas)
(88 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.069 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales