Siemens OSM Manual de usuario descargar pdf (Pagina 47)

Command Interpreter (CLI)

3-4

Industrial Ethernet OSM/ESM Network Management

C79000-G8976-C137-08

3.4 Login

Once the connection has been established via the serial port or using TELNET, the

following prompt appears:

Type in admin (for administrator) or user (for user) according to your access

permission and then press [Return].

Password:

Enter your administrator or user password and press [Return].

Note

If no new passwords were assigned (factory default), the valid password is admin

for administrator and user for user.

If the password is lost, the OSM/ESM can be reset to the default values by

pressing the button on the front panel, see Section 2.4. The passwords admin or

user are then valid again.

Please note that after logging in via the serial port, commands can be entered until

you log out with the exit command. Disconnecting the cable does not close the

session.

The CLI then displays the start menu and the prompt

CLI>

You can now activate the commands of the CLI.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 157 158

Sin comentarios

Siemens OSM Manual de usuario Pagina 47