Siemens OSM Manual de usuario descargar pdf (Pagina 49)

Command Interpreter (CLI)

3-6

Industrial Ethernet OSM/ESM Network Management

C79000-G8976-C137-08

Example

The following example illustrates how to use CLI commands.

Example:

The command status <E | D> [ports] is used to enable or disable OSM/ESM

ports. The user enters the following: status followed by a blank and then the

mandatory setting either E (= enable) or D (= disable) and then the optional port

numbers as described in Table 3-1. If you do not enter a port number, the

command applies to all ports.

S To enable the ports 2, 3, 4 to 6:

Enter status E 2,3,4-6 and confirm with [Return].

S To disable ports 1 and 4 to 6:

Enter status D 1,4-6 and confirm with [Return].

Note

The example refers to the 8-port variant of the OSM/ESM.

CLI Menus and Description

The following tables contain the commands, CLI menus and a brief description. If

there are several alternatives for a command parameter, the default is always the

value to the extreme left.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 157 158

Sin comentarios

Siemens OSM Manual de usuario Pagina 49