Siemens DTU3005-B Manual del operador descargar pdf (Pagina 133)

Appendix E: Device Data Format

Siemens Energy & Automation, Inc. 129

General Trip of Device 38 ms since fault (-1 = no occurance)

Trip by thermal overload

protection 1

39 ms since fault (-1 = no occurance)

Trip by thermal overload

protection 2

40 ms since fault (-1 = no occurance)

Back-up Overcurrent: General Trip 41 ms since fault (-1 = no occurance)

External Trip 1: General Trip 42 ms since fault (-1 = no occurance)

External Trip 2: General Trip 43 ms since fault (-1 = no occurance)

Diff. Prot.: Blocked by

harmonics L1

44 ms since fault (-1 = no occurance)

Diff. Prot.: Blocked by

harmonics L2

45 ms since fault (-1 = no occurance)

Diff. Prot.: Blocked by

harmonics L3

46 ms since fault (-1 = no occurance)

Differential Protection: General Trip 47 ms since fault (-1 = no occurance)

Differential Protection: L1 48 ms since fault (-1 = no occurance)

Differential Protection: L2 49 ms since fault (-1 = no occurance)

Differential Protection: L3 50 ms since fault (-1 = no occurance)

Differential Protection: Trip by Idiff> 51 ms since fault (-1 = no occurance)

Differential Protection: Trip by

Idiff>>

52 ms since fault (-1 = no occurance)

Reserved 53–56 For Future Expansion

1. This register location represents the sequential registers and their numbers within the device itself; as illustrated in Figure 5.1 in Chapter 5, the data

2. Status information for each parameter is transmitted in two bits. The status bit indicates status (true = 1, false = 0) for the parameter and the valid bit indi-

cates that the device has sucessfully updated the value in the status bit (true = 1, false = 0).

Device Command Data Retrieved From PLC (7UT512)

First Command Word (Command Word) Additional Command Words (Data or Value)

0 = No command Unused

1 = Time Sync 2nd Word: Time [ms] - (0-59999)

3rd Word: Time [h/m] - high byte: HH (1-24), low byte: MM (0-59)

4th Word: Date [m/d] - high byte: MM (1-12), low byte: DD (1-31)

5th Word: Date [y] - YY (00-99)

2 = Reset LEDs Unused

3 = Activate Parameter Set A Unused

4 = Activate Parameter Set B Unused

5 = Activate Parameter Set C Unused

6 = Activate Parameter Set D Unused

10 = General Command 2nd Word: [Typ] in high byte, [Inf] in low byte

Real-Time Device Data Stored in PLC (7UT512) (Continued)

Function Register Location in

PLC Block

Range or Contents

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 139 140 141

Comentarios a estos manuales

Sin comentarios

Siemens DTU3005-B Manual del operador Pagina 133

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Siemens DTU3005-B