Siemens SIMATIC TI500 Manual de usuario descargar pdf (Pagina 34)

Gateway Installation and Configuration

3-6

TIWAY I Gateway User Manual

3.2 Dipswitch Configuration and Function

Two

banks of dipswitches are located behind the access cover on the front of

the Gateway

. One is for the host port and the other is for the network port.

The following sections define the switches and describe the effect they have

on the Gateway’

s operation.

There are eight configuration switches for the host port, and ten for the

network port. The switch settings are binary coded so that Switch 1

represents the most significant bit (MSB) and Switch 8 or 10 represents the

least significant bit (LSB).

When setting the dipswitches on the Gateway

, check to make sure that the

settings match those on the host system and the network.

NOTE:

Most of the dipswitch settings are read by the Gateway only after a

reset. Any changes made to the dipswitch settings must be followed by a

reset. (Network port switches 7 and 10 are read and updated every scan.)

able 3-1

Host Port Dipswitch Configuration

Switch Function Configuration Settings

– 4

Baud Rate:

10 bps to 19.2 kbps)

Set these to match baud rate setting of

the host system.

5 Asynchronous/Synchronous Asynchronous

6 Full/Half Duplex System-dependent; see page 3-7

7 Parity On/Off System-dependent; match host system

8 Even/Odd Parity System-dependent; match host system

able 3-2

Network

Port Dipswitch Configuration

Switch Function Configuration Settings

– 4

Baud Rate

10 bps to 1

15.2 kbps)

Set to desired TIWAY I baud rate; see

Figure 3-3.

5 Asynchronous/Synchronous System-dependent; see page 3-8

6 Full/Half Duplex System-dependent; see page 3-9

7 IDT Data Addressing Mode System-dependent; see page 3-9

8 NRZI/NRZ Encoding Asynch = NRZI; Synch = NRZ or NRZI

9 Test/Operate Always set to Operate (0)

10 Discrete Output type select System-dependent; see page 3-9

Overview

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 93 94

Comentarios a estos manuales

Sin comentarios

Siemens SIMATIC TI500 Manual de usuario Pagina 34

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores Siemens SIMATIC TI500