Siemens CCIC1410 Guía de instalación descargar pdf (Pagina 78)

Configuration with the CCIC1410 Homepage

Siemens Building Technologies

Fire Safety & Security Products 05.2009

z Media Type:

– Snapshot:

Select to send snapshots when a trigger is activated.

Î Source:

Select whether to use snapshots from stream 1 or stream 2.

Î Send pre-event images:

The network camera has a buffer area; it temporarily holds data up to a certain

limit. Specify how many images are to be captured before a trigger is activated.

Up to seven images can be generated.

Î Send post-event images:

Specify how many images are to be captured after a trigger is activated. Up to

seven images can be generated. For example, if both the Send pre-event

images and Send post-event images are set to seven, a total of 15 images are

generated after a trigger is activated.

– Video clip:

Select to send video clips when a trigger is activated.

Î Source:

Select whether to record video clips from stream 1 or stream 2.

Î Pre-event recording:

The network camera has a buffer area; it temporarily holds data up to a certain

limit. Specify for how many seconds video clips are to be recorded before a

trigger is activated. Up to nine seconds can be set.

Î Maximum duration:

Specify the maximum recording duration in seconds. Up to ten seconds can be

set. For example, if the pre-event recording is set to five seconds and the

maximum duration is set to ten seconds, the network camera continues to

record for another four seconds after a trigger is activated.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 95 96

Sin comentarios

Siemens CCIC1410 Guía de instalación Pagina 78