Siemens CCIC1410 Guía de instalación descargar pdf (Pagina 31)

CCIC1410 Installation Wizard

Siemens Building Technologies

Fire Safety & Security Products 05.2009

Fig. 6 Wireless Settings page

z SSID (Service Set Identifier)

“SSID” is a name that identifies a wireless network. Access points and wireless

clients attempting to connect to a specific WLAN (Wireless Local Area Network)

must use the same SSID. The default setting is "default".

Note: The maximum length of SSID is 32 single-byte characters.

z Wireless mode

Click on the pull-down menu, and you can see the following options:

– “Infrastructure”

The device is connected to the WLAN via an Access Point (the default

setting).

– “Ad-Hoc”

The device is connected directly to a host equipped with a wireless adapter in

peer-to-peer mode.

– “Channel”

While in Infrastructure mode, the channel will be set automatically to the same

channel setting of the selected Access Point. While in Ad-Hoc mode, the

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 95 96

Sin comentarios

Siemens CCIC1410 Guía de instalación Pagina 31