Siemens SPCK620 Guía de usuario descargar pdf (Pagina 37)

User programming via the keypad

User Menus

Siemens AB

A6V10271018

Security Products

26.09.2011

NORMAL

The door is in normal operation mode. A card with the corresponding

access rights is needed to open the door.

MOMENTARY

The door is opened only for a timed interval to allow access.

LOCKED

The door is locked. The door remains closed even if a card with the

corresponding access rights is presented.

UNLOCKED

The door is unlocked.

7.1.12 GRANT ACCESS

NOTICE

These menu options are not available if the ALLOW ENGINEER or ALLOW

MANUFACTURER options are disabled in the OPTIONs menu. These options

can be enabled or disabled only when the system is in ‘Unrestricted’ mode.

When engineer or manufacturer access has been allowed, the keypad displays the

text ENGINEER ENABLE or MANUFACT ENABLE. When access has been

granted, the user cannot access the system until the engineer has logged off.

To allow engineer access:

1. Scroll to GRANT ACCESS and press SELECT.

2. Select to ALLOW ENGINEER and select ENABLED.

3. Select to ALLOW MANUFACT. and select ENABLED.

4. To disallow engineer/manufacturer access, follow the same path and toggle to

DISABLED and press SELECT.

For Swiss CAT 1 and CAT 2 regional requirements, when Engineer Access is

granted, all areas must be unset otherwise the engineer will be denied access.

7.1.13 REPORT TO ENG

The user can request that the last 10 events in the log be sent to the engineer by

SMS message.

1. Scroll to REPORT TO ENG and press SELECT.

2. Enable or disable this option as required.

Note: The 10 events may require more than one SMS message, depending on the

size of their string.

7.1.14 ACCESS LOG

Zone access on the system is displayed in the ACCESS LOG option.

1. Scroll to ACCESS LOG and press SELECT.

2. Select a door on the system for which you want to display access events.

 The most recent access events are displayed with a date and time.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43

Comentarios a estos manuales

Sin comentarios

Siemens SPCK620 Guía de usuario Pagina 37

Comentarios a estos manuales

Relacionado con productos y manuales para Teclados numéricos Siemens SPCK620