Siemens TC35 Terminal Especificaciones descargar pdf (Pagina 9)

AT Command Set

TC3X_ATC_01_V04.00 Page 9 of 204 29.05.2002

4.2 58 AT+CALA Alarm mode not applicable to TC35 Terminal.

RTC initialization after wake-up into Alarm mode

described.

4.5 63 AT+CBST Transmission rate 14400 bps now supported.

4.6 64 AT+CCFC Description revised, examples added

4.7 67 AT+CCLK RTC initialization after wake-up into Alarm mode

described

4.9 69 AT+CFUN Chapter revised

4.15 73 AT+CHUP Note added: AT+CHUP implemented like ATH

4.18 75 AT+CLCK Description revised, examples for phone security lock

types and call barring added

4.22 84 AT+CMEE Setting not saved when ME is powered down

4.24 86 AT-CMUX Overview on Multiplex mode updated

4.24.1 87 AT+CMUX Restrictions on Multiplex mode updated

4.26 90 AT+COPS Chapter revised

4.28 93 AT+CPBR Description revised, examples added

4.31 / 4.31.1 96 / 99 AT+CPIN Description revised. Summary of actions to be taken

after authentication failure

4.32 101 AT+CPIN2 Description revised, examples added

4.34 104 AT+CPWD Description revised, examples added

4.37 108 AT+CREG Description revised, examples added

5.15 141 AT+CSMP Command syntax corrected, first parameter

mandatory

6.5 148 AT^SBC Default setting of <current> described

Automatic shutdown explained in more detail

6.7 152 AT^SCKS URC not stored when ME is powered down

6.19 162 AT^M20 Description revised

7.1.5- 7.1.14 181 - 193 Several AT+CEER location Ids and release causes added

7.1.3 185 URCs Further explanations relating to URCs

7.2 / 7.3 194/196 Usability of AT commands with or without PIN authentication: Both lists

updated

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 203 204

Sin comentarios

Siemens TC35 Terminal Especificaciones Pagina 9