Siemens TC35 Terminal Especificaciones descargar pdf (Pagina 136)

AT Command Set

TC3X_ATC_01_V04.00 Page 136 of 204 29.05.2002

Reference

GSM 07.05

General remarks:

· Parameters <mt>=2,3 and <ds>=1 are only available with GSM phase 2+ (see

+CSMS=1). Incoming SMs or Status Reports have to be acknowledged with

AT+CNMA=0 when using these phase 2+ parameters.

· The parameters <ra> and <tora> will only be displayed if AT^SSCONF=1 has

been set before. See Chapter 6.37 for details on AT^SSCONF.

Handling of Class 0 short messages:

· If the host application is provided with a display and AT^SSDA=1 has been set

Class 0 short messages can be displayed immediately. Refer to Chapter 6.38

for details.

· If the host application does not include a display, ME handles Class 0 short

messages as though there was no message class, i.e. it will ignore bits 0 and 1

in the TP-DCS and normal rules for exceeded memory capacity shall apply.

This approach is compliant with GSM 03.38.

Requirements specific to Multiplex mode:

· In multiplex mode (AT+CMUX=0) only one channel can use a phase 2+

parameter. The parameter for <mt> and <ds> on the other channels have to be

set to zero.

· If either a SM or a Status Report is not acknowledged, all +CNMI parameters

will be set to zero on all channels.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 203 204

Sin comentarios

Siemens TC35 Terminal Especificaciones Pagina 136