Siemens P1 Manual de usuario descargar pdf (Pagina 28)

P1 Panelboards • Quick reference for selection and application

UL 1449 3rd Edition SPD

TPS3 L2 - True 10 Mode Protection

Surge Protection Device (SPD) for Revised P1 Lighting Distribution Panelboards

(for Original P1 – refer to TPS3 L1 Series)

These newly developed kits are for use in the new revised P1 Series only.

Interior part numbers must end with “N” or “T”.

Features:

• Mounts internal to:

– Revised P1 Lighting Panelboards

• Consult factory for field retrofit in Revised P1 Lighting Panelboards

• UL 1449 3rd Edition Recognized

• UL 1283

• Type 4 SPD intended for use in Type 1 applications (Type 2, cUL)

• UL Type 1 tested with all internal OCP and safety coordination

features included

• Large block, individually fused, thermally protected, 50 kA MOVs

• 20 kA In (most models)

• 200 kA SCCR (most models)

• UL96A Lightning Protection Master Label appropriate (@ 20 kA I

• Applications

– Provides main service or downstream protection for sensitive computer and

electronic loads

– Standard redundancy use: 150 kA per phase

– Maximum redundancy use: 300 kA per phase

• SPD Specifications

– Directly connected discrete protection elements between all possible modes

providing true 10 mode protection

– Surge Current Rating Per Phase

Per Phase L-N L-G L-L N-G

150kA 50kA 50kA 50kA 50kA

300kA 100kA 100kA 100kA 100kA

– 100% monitoring (Every MOV is monitored, incl. N-G)

– EMI/RFI filtering: Active tracking up to -50 db from 10 kHz to 100 MHz

– Repetitive impulse: 5,000 hits

– Less than ½ nanosecond response time

– Relative humidity range: 1-95% non-condensing

– Operating frequency: 47-63 Hz

– Operating temperature: -25°C (-15°F) to +60°C (140°F)

1 2 ... 23 24 25 26 27 28 29 30 31 32

Sin comentarios

Siemens P1 Manual de usuario Pagina 28