Siemens TC35 Terminal Especificaciones descargar pdf (Pagina 405)

100

101

TC35i AT Command Set

16.5 AT^SCTM

obil

TC35i_ATC_V02.07 Page 405 of 439 1/30/04

Confidential / Released

Unsolicited Result Codes

URC 1

URCs will be automatically sent to the TA when the temperature reaches or exceeds the critical level, or when

it is back to normal.

^SCTM_A: <m>

for battery temperature

URC 2

^SCTM_B: <m>

for module (board) temperature

Command Description

The read command returns the following parameters:

• the URC presentation mode

• information about the current temperature range of the module

Please note that the Read command does not indicate the temperature range of the battery. This value can

only be reported by an Unsolicited Result Code.

• The board temperature in Celsius if parameter

<p>=1.

Select

<n> to enable or disable the presentation of the URCs. Please note that the setting will not be stored upon

Power Down, i.e. after restart or reset, the default

<n>=0 will be restored. To benefit from the URCs <n>=1 needs

to be selected every time you reboot the GSM engine.

Parameter Description

(&F)

Presentation of URCs is disabled (except for <m> equal to -2 or +2).

1 Presentation of URCs is enabled.

-2 Below lowest temperature limit (causes immediate switch-off)

-1 Below low temperature alert limit

0 Normal operating temperature

1 Above upper temperature alert limit

2 Above uppermost temperature limit (causes immediate switch-off)

(&F)

Suppress output of <temp> in test and read command.

1 Output

<temp> in test and read command.

Board temperature in Celsius. Is comprised between the lowest temperature limit and the uppermost tempera-

ture limit.

<n>

(num)

<m>

(num)

<p>

(num)

<temp>

(num)

1 2 ... 400 401 402 403 404 405 406 407 408 409 410 ... 438 439

Comentarios a estos manuales

Sin comentarios

Siemens TC35 Terminal Especificaciones Pagina 405

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Siemens TC35 Terminal