Siemens TC35 Terminal Especificaciones descargar pdf (Pagina 193)

100

101

TC35i AT Command Set

8.5 AT^SMONC

obil

TC35i_ATC_V02.07 Page 193 of 439 1/30/04

Confidential / Released

Location area code

4 digits, e.g. 3010

0000 not decoded

Cell identifier

4 hexadecimal digits, e.g. 4EAF

0000 not decoded

Base station identity code

2 digits, e.g. 32

00 not decoded

ARFCN (Absolute Frequency Channel Number)

0 not decoded. In this case, all remaining parameters related to the same chan-

nel are neither decoded. For example, a non-existing cell appears as follows:

000,000,0000,0000,00,0,0,-,-

Received signal level of the BCCH carrier (0..63). The indicated value is composed of the measured value in

dBm plus an offset. This is in accordance with a formula specified in 3GPP TS 05.08

Coefficient for base station reselection, e.g. 30. In dedicated mode, under certain conditions the parameter can-

not be updated. In such cases a '-' is presented.

Coefficient for base station reselection, e.g. 30. In dedicated mode, under certain conditions the parameter can-

not be updated. In such cases a '-' is presented.

Note

• To some extent, the cell monitoring commands AT^MONI, AT^MONP and AT^SMONC cover the same param-

eters. The receiving level, for example, can be queried with all three commands. Yet the resulting values may

be slightly different, even though obtained over a time period of a few seconds. This is quite normal and noth-

ing to worry about, as the cell information is permanently updated.

<LAC>

(num)

<cell>

(num)

<BSIC>

(num)

<chann>

(num)

<RSSI>

(num)

<C1>

(num)

<C2>

(num)

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 438 439

Comentarios a estos manuales

Sin comentarios

Siemens TC35 Terminal Especificaciones Pagina 193

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Siemens TC35 Terminal