Siemens SIMATIC TIWAY 1 Manual de usuario descargar pdf (Pagina 118)

HOST COMMAND SET REFERENCE

UNILINK HOST

ADAPTER5–33

USER MANUAL

5.4.7

Enable/Disable Macr

o Execution — 16

The ENABLE/DISABLE MACRO EXECUTION command processes a list of

macro buffer numbers to either enable or disable the specific macros for

execution. The exception flag is cleared for each valid macro buffer number

regardless of whether the macro is being enabled or disabled. If the macro is

successfully

enabled,

the MRSW is reset or if the macro is successfully disabled,

the

MRSW is set to the disabled T

ermination Code.

NOTE

The send Primitive and disconnect macro types can

only be enabled when their associated secondary

device is not in the secondary log.

Command: 16

ss [bb tt]

Response:

16 ss [bb rr]

Usage: OPERATION

Modes:

MHIU, HIU

Parameters:

The Source Id number

bb The macro buffer number. The response returns the buffer

numbers

in the same order as specified in the command.

01 hex to enable the macro or 00 hex to disable it.

rr The

response code for that macro buffer. The possible values are:

= the macro was successfully enabled or disabled as requested.

= the macro buffer number requested has not been allocated.

Use

the ALLOCA

TE MACRO STORAGE

BUFFERS command to

allocate

the buffer

, then reissue this request.

= the macro buffer number specified has a different Source Id

than the one specified. Check your macro definitions table and

reissue

with the correct Source Id.

= the macro buffer

specified is the action macro in a link macro

pair

which cannot be explicitly enabled or disabled.

= the ‘tt’ parameter specified was a value other than

00 hex or

01 hex.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 207 208

Comentarios a estos manuales

Sin comentarios

Siemens SIMATIC TIWAY 1 Manual de usuario Pagina 118

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Siemens SIMATIC TIWAY 1