Siemens KDN Series Especificaciones descargar pdf (Pagina 214)

100

101

4 Communication settings and guide of HMI connecting with controller

"1"; [Group number] range is 0-32, select "0"; [station number] range 1-64, 1 occupied by the computer

side, can be set to 2-64, the example is set to "2" ; [Model] Select "online". Next, click [operation], set the

IP address of the dialog box pops up, in part by the network to determine the first three, the fourth part of

the free use of the network number. One thing to note is that the figure of [the initial time setting] to choose

"Always wait to open" (stop when communication), or Ethernet port is not open external device. Click [end

set] button to save the settings.

2. Operational settings

3. Open settings

In line 1 [protocol] selection "UDP" protocol; and that [open in pairs] option select "pairs", system will be

prompted to

selection is confirmed, the parameters of line 2 will be self-generated, so as to form a two-way

communication. PLC's port and PC port range is & H401 - & HFFFF, the example is set to & H1000, PC's

IP address is your computer's IP. Click [End set] to save, and form an Ethernet module and host two-way

communication channel.

4. Just write to set the PLC in the main menu selection [online]->"PLC write", the "PLC/network

parameters" in the content downloaded to the PLC, the correct execution, the writing on the work of the

Ethernet parameters completed.

- 211 -

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 381 382

Comentarios a estos manuales

Sin comentarios

Siemens KDN Series Especificaciones Pagina 214

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Siemens KDN Series