Siemens EK 746 Series Instrucciones de operaciones descargar pdf (Pagina 29)

Mounting

5.4 Mounting with mounting plate

SCALANCE W786 outdoor access point

Operating Instructions, 06/2013, A5E02280428-08

To screw the cover plate for the cable feedthrough to the mounting plate, follow the steps

below:

1. Fit the cover plate on the mounting plate from below until the two lugs (position

in the

figure above) engage the lower edge of the mounting plate.

2. Secure the cover plate to the mounting plate with two M4 screws. The screws are

supplied with the assembly kit.

5.4.3

Fitting the mounting plate to an S7-300 standard rail

Procedure

Figure 5-10 Side view of a mounting plate on an S7-300 standard rail

Follow the steps below to fit the mounting plate to an S7-300 standard rail:

1. Place the mounting plate with the two protruding catches on the top edge of the S7-300

standard rail (position

in the figure above).

2. At the bottom, the mounting plate has two lugs with holes. Screw the lugs to the S7-300

standard rail (position

in the figure above). The required screws are supplied with the

mounting plate.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 89 90

Sin comentarios

Siemens EK 746 Series Instrucciones de operaciones Pagina 29