Siemens CA 343 Series Manual de usuario descargar pdf (Pagina 8)

When you drop the object on a slot, a window will pop up for the Ethernet configuration.

Do as follows (Figure 11):

1. Setup the IP address for the PLC, here 192.168.200.20.

2. Click new to create a new Ethernet network.

3. Click OK.

Figure 11

4. Make sure the Ethernet network just created is selected. This identifies the Network the CP343

will be connected to and activate the Ethernet port (Figure 12).

Figure 12

Then click OK to close all popup windows and return to HW Config. Save the configuration and close HW Config.

The project manager should now display the CP343-1 communication card in the tree (Figure 13).

It is now required to create a connection between the PLC and the G3. This connection is set up in Net Pro. Select

the PLC CPU and double click on the “Connections” icon (Figure 13) to access NetPro configuration tool.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Sin comentarios

Siemens CA 343 Series Manual de usuario Pagina 8