Siemens CA 343 Series Manual de usuario descargar pdf (Pagina 15)

When you drop the object on a slot, a window will pop up for the Ethernet configuration.

Do as follows (Figure 23):

1. Setup the IP address for the PLC, here 192.168.200.20.

2. Click new to create a new Ethernet network.

3. Click OK.

Figure 23

4. Make sure the Ethernet network just created is selected. This identifies the Network the CP343

will be connected to and activate the Ethernet port (Figure 24).

Figure 24

Then click OK to close all popup windows and return to HW Config. Save the configuration and close HW Config.

The PLC is now setup. Download the configuration and make sure the PLC takes the entire configuration.

1 2 ... 10 11 12 13 14 15 16 17 18

Sin comentarios

Siemens CA 343 Series Manual de usuario Pagina 15