Siemens E12 Manual de usuario Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 47
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
Industry Automation and Drive Technologies - SCE
TIA Training Document
Page 24 of 47 Module
E12
Status: 01/2010 Vision Sensor Shape Check with SIMATIC S7-300F 2PN/DP and VS120
20. By clicking on ' ’, we can now load the hardware configuration into the PLC. The operating
mode switch should be on Stop! ( ).
(After the hardware is loaded into the CPU, the red BF LED on the VS120 goes out)
21. Close the hardware configuration.
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 46 47

Comentarios a estos manuales

Sin comentarios