Siemens E12 Manual de usuario descargar pdf (Pagina 11)

Industry Automation and Drive Technologies - SCE

TIA Training Document

Page 11 of 47 Module

E12

Status: 01/2010 Vision Sensor Shape Check with SIMATIC S7-300F 2PN/DP and VS120

"Connect" Menu:

The Ethernet IP mode has to be set to PNIO.

Place the cursor in front of Ports and press the OK button

Place the cursor in front of Ethernet and press the OK button

Place the cursor in front of IP Mode and press the OK button

Place the cursor in front of PNIO and press the OK button

The evaluation device now requests a restart; press the OK button to confirm.

After the restart, the red bus error LED (BF) flashes until communication is established by means of

PROFINET between a controller and the VS120.

ESC may have to be pressed several times to get to the main menu.

All additional information for operating the evaluation device is provided in chapters 8.3, 8.4

and 9.2 of the operating instructions

“Image Processing Systems Vision Sensor SIMATIC VS120“.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 46 47

Sin comentarios

Siemens E12 Manual de usuario Pagina 11