Siemens MC35 Manual de usuario descargar pdf (Pagina 30)

AT Command Set

MC35_ATC_01_V04.00 Page 30 of 238 02.04.2002

2.30 ATV Set result code format mode

Write command

ATV[<value>]

Response

This parameter setting determines the contents of the header and trailer transmit-

ted with result codes and information responses.

When <value> =0

When <value> =1

Parameter

<value>

0 Information response: <text><CR><LF>

Short result code format: <numeric code><CR>

1 Information response: <CR><LF><text><CR><LF>

Long result code format: <CR><LF><verbose code><CR><LF>

Reference

V.25ter

Note

In case of using the command without parameter <value> will be set to 0.

Information responses described in chapter 9 (verbose code and numeric code).

2.31 ATX Set CONNECT result code format and call monitoring

Write command

ATX[<value>]

Response

This parameter setting determines whether or not the TA detects the presence of

dial tone and busy signal and whether or not TA transmits particular result codes.

Parameter

<value>

0 CONNECT result code only returned, dial tone and busy de-

tection are both disabled

1 CONNECT<text> result code only returned, dial tone and busy

detection are both disabled

2 CONNECT<text> result code returned, dial tone detection is

enabled, busy detection is disabled

3 CONNECT<text> result code returned, dial tone detection is

disabled, busy detection is enabled

4 CONNECT<text> result code returned, dial tone and busy de-

tection are both enabled

Reference

V.25ter

Note

Related <text> see chapter 9.1.5.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 237 238

Comentarios a estos manuales

Sin comentarios

Siemens MC35 Manual de usuario Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para Dispositivos de redes celulares Siemens MC35